Contrex MLP-Trim Bedienungsanleitung PDF herunterladen (Seite 183)

C - 15

CP-74 DRIVE ENABLE LOGIC

Drive Enable Logic (CP-74) determines which conditions of the Ramped Reference (MP-46) and

the feedback will control the Drive Enable logic.

Enter "0" to deactivate the Drive Enable output (output high) when the Ramped

Reference is zero, and activate the Drive Enable output (output low) when the

Ramped Reference is not zero.

Enter "1" to deactivate the Drive Enable output when both the Ramped Reference and

the feedback are zero, and activate the Drive Enable output when the Ramped

Reference is not zero.

CP-75 OFFSET NULL

Offset Null is used to determine the analog input level where the offset term is zero (has no

influence).

CP-76 OFFSET AUTHORITY

Offset Authority determines the quantity of the offset term (amount of influence) for a given

analog input level.

CP-77 OFFSET POLARITY

Offset Polarity determines if the offset term is added or subtracted from the follower scaled

reference.

CP-79 SETPOINT LOCKOUT MASK

Setpoint Lockout Mask determines which setpoints are disabled when the keypad is locked out.

If CP-79 is set to "0", then none of the setpoints (CP-01 through CP-04) are disabled. If CP-79 is

set to "1", then all four of the setpoints are disabled. If CP-79 is set to "2", then CP-02 and CP-04

are disabled while CP-01 and CP-03 remain enabled.

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 215 216

Keine Kommentare

Contrex MLP-Trim Bedienungsanleitung Seite 183