Contrex MLP-Drive Bedienungsanleitung PDF herunterladen (Seite 178)

C - 12

MP-59 FREQUENCY OVER FLOW COUNTER

The Frequency Over Flow Counter (MP-59) is a counter that increments each time the frequency

input to the MLP–Drive causes an overflow. To reset the counter to “0”, press the Clear key.

CP-60 OPEN LOOP

If CP-60 is set to "1", then the J6 Pin 12 input acts as the Scroll Down input. If CP-60 is set to

"2", then this input is the Open/Closed Loop input.

CP-61 DIRECT ENABLE

In the Direct mode of operation, the drive output from the MLP–Drive that is connected to the

motor drive can be set directly. Direct mode is an open-loop mode of operation. Use Direct

Enable (CP-61) to either enable or disable the Direct mode.

Enter "1" to enable the Direct Mode.

Enter “0” to disable the Direct Mode.

Enabled

Code

CP-62 INVERSE SCALING

Use Inverse Scaling (CP-61) to select either the Standard or the Inverse setpoint scaling format.

Enter “2” for Inverse Scaling.

Enter "1" for Standard Scaling.

Inverse Scaling

Code

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 213 214

Keine Kommentare

Contrex MLP-Drive Bedienungsanleitung Seite 178