Contrex ML-Drive Bedienungsanleitung PDF herunterladen (Seite 124)

Glossary - 4

the Follower mode, Acceleration/Deceleration, Tuning,

Alarms, and Jog. The ML-Drive comes factory pre-loaded

with a complete set of default Control Parameters.

Data Inquiry Use the Data Inquiry to request the current value for

Parameters (i.e., Control Parameters or Monitor Param-

eters) in serial communications.

Deceleration Time See Appendix C;CP-17.

Dedicated Keys The Setpoint key and the Tach key are shortcut keys. The

Setpoint key accesses the active setpoint variable directly

and the Tach key accesses the tach variable directly

(rather than manually entering the Code Parameter).

Derivative See Appendix C; CP-67.

Digital Motor Drive A precision motor drive that uses digital compensation

technology.

Direct Mode In the Direct mode of operation, the drive output from the

ML-Drive that is connected to the motor can be set directly.

Direct mode is an open-loop mode of operation. Scaling,

Acceleration/Deceleration, and closed loop compensation

(PID) software are not involved in the Direct mode. The

Direct mode is used in conjunction with the Run and Stop

controls.

Direct Enable See Appendix C; CP-61

Direct Setpoint See Appendix C; CP-06

Display Test Tests the LED Display Panel Segments.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 177 178

Keine Kommentare

Contrex ML-Drive Bedienungsanleitung Seite 124