Contrex ML-TRIM Bedienungsanleitung PDF herunterladen

ML-TRIM INSTALLATION/START-UP GUIDE

CAUTION

Hazardous Voltages. Can cause severe injury, death or damage to

equipment. The ML-Trim should only be installed by a qualified

electrician.

Proper earth grounding of all electronic equipment is required for

successful operation. Connect a low impedance earth ground to

terminal 3 of connector J3.

Separate all logic and signal level wiring (J1, J2, J4 and J5) from all

AC power wiring (J3).

Shield all logic and signal wiring (J1, J2, J4 and J5) and terminate to

earth ground at one point only.

REQUIRED WIRING

ONTREX, INC.ONTREX, INC.

ONTREX, INC.

SK1451 Rev 3SK1451 Rev 3

SK1451 Rev 3

Page 1

1 2 3 4

Inhaltsverzeichnis

Seite 1 - REQUIRED WIRING

ML-TRIM INSTALLATION/START-UP GUIDECAUTIONHazardous Voltages. Can cause severe injury, death or damage toequipment. The ML-Trim should only be instal

Seite 2

SCALINGAfter completing the required wiring of the ML-Trim, follow the procedure below to scale the ML-Trim and motordrive for Master format RPM opera

Seite 3 - TROUBLE-SHOOTING

FOLLOWER OPERATIONComplete the “Scaling” and “Tuning” procedures for Master mode (Page 2) before proceeding with Follower operation. To enable Follow

Seite 4

Step 4: Check MP-47 (Speed Command Out).a) Should not be “0” or “100”.b) If “0”, then return to step 1 of “Scaling”.c) If “100”, check wiring to d

Verwandte Modelle: M-Trim

Weitere Dokumente für Sensoren Contrex ML-TRIM

Um das Dokument anzuzeigen Contrex ML-TRIM Bedienungsanleitung

Contrex ML-TRIM Bedienungsanleitung (180 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Contrex ML-TRIM Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Contrex ML-TRIM herunter. CONTREX ML-TRIM User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: M-Trim

Weitere Dokumente für Sensoren Contrex ML-TRIM

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Contrex ML-TRIM