Contrex M-Traverse Bedienungsanleitung PDF herunterladen (Seite 115)

3 - 68

Character 5, 6 - Parameter Number:

These characters identify the Control Parameter that you want to change

(i.e., “16” = CP-16).

Characters 7 through 14 - DATA:

These characters transmit the new value for a Control Parameter that you want to

change. The Data must be within the range specified in Appendix E. Characters 7

and 8 should always be "0" and are only used with the data inquiry response.

Character 15 - Data Format:

Character 15 indicates the decimal location and polarity of the data that was

transmitted in characters 7 through 14.

Use the following codes to indicate decimal location and polarity:

Code Format

0 +XXXXXX

1 +XXXXX.X

2 +XXXX.XX

3 +XXX.XXX

4 +XX.XXXX

5 +X.XXXXX

6 -XXXXXX.

7 -XXXXX.X

8 -XXXX.XX

9 -XXX.XXX

: -XX.XXXX

; -X.XXXXX.

Character 16 - ETX:

Always use the ASCII “ETX” character to terminate the record.

Example of Parameter Send:

A new Acceleration Time of 52.3 seconds is sent to the M–Traverse at address 4.

ASCII character string: “STX0436000005230ETX”

Note: The character string has no spaces between the characters.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 201 202

Keine Kommentare

Contrex M-Traverse Bedienungsanleitung Seite 115